£29.99

Bayonet and vented Molle Utility Pouch
Double Lined 1000 Denier Nylon
Fully IRR
Genuine Multicam
25mm Nexus side release buckle
Velcro closure for extra security
Smaller and more compact than the issue pouch but will take the Jetboil
Fixed lid
Smoke grenade pouch on Right, will also accept current FFD
Takes up 3 PALS on belt
A very strong and robust pouch
200mm H X 120MM W x 90MM D
find out more

£29.99

Bayonet and vented Molle Utility Pouch
Double Lined 1000 Denier Nylon
Fully IRR
Genuine Multicam
25mm Nexus side release buckle
Velcro closure for extra security
Smaller and more compact than the issue pouch but will take the Jetboil
Fixed vented lid for antennae and cables
Bayonet strips on left KDU strip on right
Takes up 3 PALS on belt
A very strong and robust pouch
200mm H X 120MM W x 90MM D
find out more

£24.99

Plain Molle Utility Pouch
Double Lined 1000 Denier Nylon
Fully IRR
Genuine Multicam
25mm Nexus side release buckle
Velcro closure for extra security
Smaller and more compact than the issue pouch but will take the Jetboil
Fixed lid, for taller items see our molle utility pouch
Takes up 3 PALS on belt
A very strong and robust pouch
200mm H X 120MM W x 90MM D

find out more

£12.99

A strapping sytem that attatches to a Molle daysack/bergen that holds the helmet securely
Works well with Zip top Daysacks where there is no flap to put the helmet under
Also has 2 quick release buckles for speed of release.
Daysack not included !!!!
find out more

£112.50

Capacity: 42 Litres
Cargo capacity: 39 Litres
Source bladder: 3 Litres

Main Compartment
30 Litres capacity. The main zip extends down to each side to give easy access
2 x Radio Antenna openings
2 x lower hydration tube openings

Top Front Pocket
6 Litre pocket features an smaller pleated pocket for documents

Lower Front Pocket
3 Litre pocket. Zip opening extend the width of the pack for ease of access

Fabrics
500 Denier Multicam polyamide fabric

Spacer fabric used on back face and under side of the shoulder strap used to encourage airflow and increase comfort

Shoulder Strap
Shoulder straps feature a stiffener to distribute over trapezius and calvical reduce the possibility of rucksack palsy

Back Face
Raised closed cell foam padding raises the load from the back to further encourage airflow

External Bladder Pocket
Top bladder opening allows easy access to the bladder for refilling & cleaning. The pocket can be collapsed for access to the full capacity of the pack when not using the hydration. Double zip opening allows the bladder tube to emerge centrally, or either side of the pack

Harness
Vertical back frame drops some of the load to the musculoskeletal frame via the removable hip belt and pelvic girdle

Chilly™ Compatible
The Pack features 4 webbing loops that integrates with the BCB Chilly™. When attached, the Chilly is located on the top of the pack, whilst allowing access to all pockets. The position does not interfere with head room.

Source bladder

Taste-free
Glass-like film technology stops dirt and bacteria from sticking to the plastic
Easy fill & cleaning
Quick Mate Technology for quick disconnection of the tube
Low, baffled profile
Angled Storm Valve for ease of drinking, including shut off twist mechanism
Dirt Shield

find out more

£18.99

A very simple but effective design
Extremely low profile to stop rub when used under armour
100% webbing strap
The width at the shoulders is 75mm to spread the loading
Height adjustable
Will fit most issue belt kit and pads
Tan only

find out more

£69.99

A brand new version of our very succesful Molle Hippo Pad.
After listening to the imput from soldiers on current ops and regimental duties we have designed this new belt to accommodate the following;-

SHAPE, the belt is now longer at the front so that it transfers weight to the hips instead of straight onto the shoulders.
It is cutaway on the bottom front to allow better movement of the legs and alleviates rubbing.
One end has a opening to allow excess belt to be stowed away.

MOLLE - All 4 rows are Molle which accomodates issue pouches and our own design pouches so that they fit very snugly and tight on the belt.

PALS
Small = 16 Pals to fit 28 - 32" waist
Medium = 19 pals to fit 32- 36" waist
Large = 21 pals to fit Above 36"

PADDING - An all new padding system. Thin high density foam for support and shape, Airmesh spacer material inside the pad for comfort and air circulation.

Manufactured from MOD spec 1000 denier nylon IRR in Genuine Multicam®

Square loops to attach our dump pouch, 6 metal D rings for yoke fittings

Roll pin buckle and the belt end finished with a metal tip

Ideal for use with body armour leaving you the choice of where to fit your pouches

This Molle belt is more comfortable, more robust and is designed specifically for JayJays own and issue pouches to fit snuggly and tight together

find out more

£169.99

PRICE REDUCTION - After numerous trials and comments we have changed our bindings and webbing strapping for a light tan colour as this adapts to and amplifies the camouflage effect and in consequence it has allowed us to lower the price of some of our items that use this type of binding and strapping.

JayJays webbing is manufactured from material that is MOD and US Mil spec. All the pouches are manufactured from double Cordura, lined and designed to be lightweight and oil resistant. All the D rings are metal and the stitching on the webbing is rot proof and guaranteed for life. The roll pin belt has an end tip and runs through the webbing so that a pouch may be replaced with an issue pouch if required. The webbing is designed to fit the standard issued yoke (not supplied).
Sizing S up to 30" waist. Medium up to 32 - 35" and the large 36" upwards.
LAYOUT
The small and medium version consist of (L to R)
A double ammo pouch that will hold three mags in each pouch and velcro on the flaps with a 109 grenade pouch attatched to side of the pouch. Attatchment loops for fitting our own dump pouch.
A utility pouch with vented lid for radio antennae and cables. Bayonet loops on left side and KDU loop on right side. (could double up as a dump pouch).
Three further plain utility pouches.
Final pouch is a utility pouch which is slightly larger to take TAMS. Due to feedback from customers we have now changed the design of the last pouch so that on the right side is a smaller pouch to take training smoke, ffd's grenades etc.
All utility pouches have ITW Nexus Fastex Clips.
The Large version has an extra plain utility pouch.


NOTE: We often update this webbing design as soldiers requirements change and textile technology is constanly improving.
For special requirement layouts please telephone 01874 610036



find out more

£42.99

A detachable MULTICAM® Yoke which is a huge improvement on the standard issue yoke.
Manufactured from 1000 denier nylon, with a mesh back panel. The shoulder straps are wider and longer and the gap between the straps is wider to stop it chaffing the neck. If small pouches are fitted they will sit lower due to the longer straps which stop Bergan /Daysack straps catching on the pouches.
The back panel is wider for comfort and is designed to fit your existing belt kit and attatches in the same way as the issue yoke. For taller people the attatching straps are longer.


find out more

£62.99

A detachable MULTICAM® Yoke that is fully molled which is a huge improvement on the standard issue yoke. Manufactured from 1000 denier nylon, with a mesh back panel. The shoulder straps are wider and longer and the gap between the straps is wider to stop it chaffing the neck. If small pouches are fitted they will sit lower due to the longer straps which stop Bergan /Daysack straps catching on the pouches. The back panel is wider for comfort and is fully molled. Designed to fit your existing belt kit and attatches in the same way as the issue yoke. For taller people the attatching straps are longer.

find out more

£199.99

Our molled MULTICAM® Hippo webbing is manufactured from material that is MOD and US Mil spec. All the pouches are manufactured from double Cordura, lined and designed to be lightweight and oil resistant. All the D rings are metal and the stitching on the webbing is rot proof and guaranteed for life. The roll pin belt has an end tip and runs through the webbing so that a pouch may be replaced with an issue pouch if required. The webbing is designed to fit the standard issued yoke (not supplied).
Sizing S up to 30" waist. Medium up to 32 - 35" and the large 36" upwards.
LAYOUT
The Fully molled version is the same as our standard Hippo Webbing but because it is fully molled there is no vented lid, 109 pouch, bayonet loops or KDU loops.
The small and medium version consist of (L to R)
A double ammo pouch that will hold three mags in each pouch and velcro on the flaps.
Three further plain utility pouches.
Final pouch is a utility pouch which is slightly larger to take TAMS or ammo.
All utility pouches have ITW Nexus Fastex Clips.
The Large version has an extra plain utility pouch.

NOTE: We often update this webbing design as soldiers requirements change and textile technology is constanly improving.
For special requirement layouts please telephone 01874 610036



find out more

£42.99

Molled Commanders pouch
Designed in conjunction with Officers, Seniors and Juniors attending Brecon courses
Double lined 1000 Denier nylon
Specifically designed to carry TAMS, Crib cards, pens etc.
Adjustable divider to create 2 compartments - (can be removed as it is attatched by velcro)
The divider has elasticated pen slots
Large box lid with a large 38mm side release buckle for ease of one handed use.
Will also take 7 x 5.56mm mags or an LMG bag
Molle fittings on the back
Fully IRR

find out more